Follow these steps to enable Exinda appliances to export NetFlow records to a Sinefa probe.
Note 1: Requires ExOS 6 (or newer).
Note 2: Ensure that the time on the Exinda device is accurate. An incorrect date or time on the device will have adverse effects on the reporting.
Log into the Exinda Management Console and navigate to the System Setup, NetFlow Configuration page.
Add the IP address of the Sinefa probe, leave the port as 2055 and make sure version 9 is selected, then click 'Add Netflow Collector'.
In the Common Options section, make the following changes:
- Active Flow Timeout: 1 minute
- Use 64 bit byte and packet counters
- Enable 'Export L7 Application ID'
- Enable 'Export Flow Direction'
- Enable 'Export Extra Information (hostnames)'
Click 'Apply Changes' when complete. This Exinda appliance will now export NetFlow records to the configured Sinefa probe.
Note: Be sure to save the Exinda configuration so these changes survive a reboot of the appliance.