There are 3 modules to SHC:
1: Controller - is the application which provides the user interface (UI) and API
2: Portal - is the application which probes connect to
3: Database - stores data and configuration
Below are the hardware and operating system requirements when setting up a Self Host Controller.
Small Deployment (minimum hardware specifications)
Sizing
Up to 5 probes (suitable for small POCs)
Configuration
Controller, Portal and Database can run on a single server.
Hardware specs
- 4 CPU Cores
- 12 GB RAM
- 500 GB SSD Disk
Medium Deployment
Sizing
Up to 250 probes
Up to 250 probes
Configuration
Controller, Portal and Database can run on one server. Database can optionally run on a 2nd server.
Controller, Portal and Database can run on one server. Database can optionally run on a 2nd server.
Hardware specs
- 8 CPU Cores
- 16 GB RAM
- 2 TB SSD Disk
Large Deployment
Sizing
Up to 1000 probes
Up to 1000 probes
Configuration
Controller and Portal run on one hardware server. Database runs on a 2nd server.
Controller and Portal run on one hardware server. Database runs on a 2nd server.
Hardware specs - Controller and Portal
- 8 CPU Cores
- 16 GB RAM
- 500GB Disk
Hardware specs - Database
- 8 CPU Cores
- 32 GB RAM
- 4 TB SSD Disk
Custom Deployment (including HA options)
Sizing
Above 1,00 probes
Please contact Sinefa for advice on deployments of over 1,000 probes.
Operating System
CentOS (version 7.x) 64-bit (minimal server installed) for bare metal installation. A preinstalled VMware image is also available.
Other Requirements
- For self host software installation and software updates the SHC needs to be able to access HTTPS and HTTP to feeds.sinefa.com
- The SHC also sends emails out for alerts and user management / invitations. Outbound HTTPS connectivity to the Internet is required to access a 3rd party transactional email delivery service.
See Also
Comments
0 comments
Article is closed for comments.