The Sinefa probe supports static routes. You will need to log onto the probe and navigate to the CLI.
Via the CLI a route can be added using the following command:
route add x.x.x.x/x via x.x.x.x
|add <prefix> via <gateway>||Add a route|
|del <prefix> via <gateway>||Delete a route|
|show||Show the routes|
|config show||Show the configured routes|
|config save||Save the config|
Note: You must save the config for the routes to survive a reboot.
In the above example we wanted to route all traffic for 172.26.0.0/24 through 172.26.0.1