Add a Probe to your account using its Serial Number

If you have a Sinefa hardware Probe, you can add it to your account using its Serial Number. There will be no need to configure anything on the Sinefa Probe.

1. Locate the Serial Number (on the cardboard box or underneath the Sinefa Probe).
2. Log into the Sinefa App at app.sinefa.com and enter the Serial number at Settings > Probes > Add Probe.
3. Once the Probe is added a message saying "Registration Succeeded" will pop up.

At this point the Probe has been added to your account.  Once the Probe comes online and can contact app.sinefa.com using HTTPS, it will appear in Settings > Probes.  If the Probe is already powered on, you may need to wait a few minutes after adding it in before it appears in the Probes list. 

Probes that are currently registered to other accounts must be deleted first from the old account before you can register them using the Serial Number.

See Also
Quick Start Guide: Hardware Set-up
Probe Networking Setup