The Ixia CloudLens agent can be enabled on Sinefa probes in order to add them as a "tool" directly in the Ixia CloudLens platform.
NOTE: Sinefa probes must be running v30.0 (or newer).
Use the Sinefa probe's CLI to configure the Ixia CloudLens agent.
cmd>cloudlens help
Commands:
show Show configuration and status information
show config Show configuration
show commands Show cli configuration commands
enable Enable the cloudlens functionality
disable Disable the cloudlens functionality
apikey set <value> Set the cloudlens API key
apikey clear Clear the cloudlens API key
tag set <value> Set the cloudlens image tag
tag clear Clear the cloudlens image tag
status cloudlens Cloudlens state
sync Force resync of cloudlens state
A typical configuration to enable CloudLens would look like this:
cloudlens tag set latest
cloudlens apikey set <your_cloudlens_apikey>
cloudlens enable
This will download, install and configure the Ixia CloudLens agent on the Sinefa probe. Any traffic sent to this probe using the CloudLens platform will be monitored automatically.
Comments
0 comments
Article is closed for comments.